Iroh is back from Her winter slumber. I got right back to work with a few different things taking the agenda right away. I rinsed out the fuel cell and got it mounted. I'm also running fuel line. I had 3/8 fuel line but the tank had a half inch fitting. So I'm running half right off the cell and switching it to 3/8 before my electric fuel pump I put on the frame. I ran braided fuel line from the mechanical fuel pump up to the carb.
Another problem I had was I had managed to weld the front cross member in right below the radiator. I sectioned it and am modifying it to make it drop and run below the radiator to where it can still bolt into the stock mounts on the radiator support.
Electric Fuel pump to prime the carburator
Braided line from the fuel pump looks good and clean
